Showing posts with label edm. Show all posts
Showing posts with label edm. Show all posts

Monday, June 10, 2013

Dubstep Drums Effects Processing Tutorial.

This is a pretty good dubstep drums effects processing tutorial from Audio Tuts. This is for Ableton but the basics apply to other environments and EDM genres.



To sum up what he does in this video:

1. Layer 3 different snares.

2. Layer a clicky, short bass with a subby bass (longer sine wave), then shortens the audio overall length.

3. Add a variety of real hi-hat sounds (stereo) in between the main rhythm. You could use toms, shakers, or any sound.

4. Add a high pass filter on the hi-hats bus / group.

5. Low Pass filter the kick drums very low for headroom. Add a "smiley" EQ curve for less midrange.

6. Add a Compressor with slow attack & release (200-300ms) to kicks, which preserves the attack. 3:1 or 1:5 ratio? -2db Gain Reduction? Adds a notch for the snare, and a slightly smiley eq.

7. Add a parametric EQs to the snares, sweep to where it sounds the best and boost. Add a low pass filter & mid dip. Add a compressor again.

8. Remember to save.

9. Variates the rhythm again. Adjust fader levels.

10. Puts reverb on the snares with a hi-pass.

11. Optional: Use gates to adjust the tail end of the sounds

12. Add any types of effects you like. There are no rules.

 

 

Wednesday, May 22, 2013

Multiband Limiting To A Loudness Curve & NS10s

multiband

This is a mini tutorial that will attempt to explain the fletcher-munson loudness curve to get a better sounding mix.

Things you should know before we start:

1. Human hearing is not flat. Our monitoring system may be flat, but our ears aren't. The human ear canal resonates around 3k. We perceive sound between 1k and 5k as louder than it really is. Sound in this range can become painful when we turn our speakers up. This is the same range that guitars are played in.

Already knowing this will help us get better mix translation. We know not to boost sound in this area too much.

2. Humans have trouble hearing at extreme ends of the spectrum (at low volume) We can't hear treble past 10k as well as we think. We can't hear bass as well as we think either. We like to boost our stereo. BUT....

3. How we perceive sound changes at different volumes.



The large upward bass curve represents what we can't hear well. The lowest sections on the curve is what "sticks out" to us. The louder music gets (higher up on the graph), the better we can hear bass. The curve gets flatter.

If your music is meant to be played on a club system or stadium, it doesn't need as much bass boost as you'd think. Notice the top curves are flatter. That means we have no trouble hearing it. Mixing on a flatter curve could encourage the listener to crank up your music, if you desire that. Also remember that people have EQ'd their sound systems themselves. This adds a monkey wrench to the situation. Since we can't know or rely on these different systems its up to the mix engineer to use the loudness curve (and consider dynamic range).

Now on to the multiband limiter.

Limiters allow you to change audio gain for custom bands. (Top graphic). Before limiting, You may want to decrease 2k to 6k bands by as much as 10db. This can be done with the gain knob. You can also increase the bass & treble range. Since I want to play my music loud, I might only boost bass by 3.5db. However if my bass kick is already loud I will leave it alone. At this point I'm not trying to get a competitively loud mix. Adjusting the mixer is probably better than using the multiband limiter, but we may not have access to that when we master! When I'm done making the mix sound right by approximating my loudness curve, I can try limiting with the main slider (makes the entire signal louder).

Now you should have a better mix!

Why do I use a multi-band limiter instead of EQ? The ones I use don't color my mix like many EQs. They have easy band controls. I can solo each EQ zone I set up. That helps me hear whats going on seperately. Later on, the compression & limiting function can help me shape the bass and the entire mix. I'm killing three birds with one stone. One plugin to mix to the loudness curve. One plugin to compress my bass peaks. One plugin to brickwall limit my volume.



The Yamaha NS10

The reason that Yamaha NS-10 speaker  translates so well is because they have just the right frequency bump in the 1k to 5k range where we can hear just fine alerady. Its a forwardness you don't want to hear at high volume because it causes pain. As a flat playback system the NS-10 is a failure, but when mixing, the exaggerated nature of this range makes a good tool.

Don't have NS10s? Just do the opposite of this tutorial. Bump the 1k to 5k frequency range by 8-10db instead of decreasing it. Ajdust your mix. Just remember to bypass it when you are done mixing!

So why did I bother getting a flat monitoring system? 

1. Good for playback at higher volume. Great for movies & video games.

2. Mixing & mastering at medium to high volumes.

3. The flat response serves purely as mental reference. No second guessing as to what it might be.

So with this knowledge we know that mixing at low volumes could lead to error. However if we add some EQ or loudness on our playback system, we can compensate a little. Even knowing this, the end results should always be checked on a flat system at a higher volume. The multi band limiter's single band gain control might be the right tool to get you there.

Why does Tron 2's soundtrack sound like a loud piece of junk? Perhaps it was mastered at lower volume, on a small system. This caused over compensation. Or perhaps they know not everyone turns up the volume on their junky home DVD system.

Thursday, March 14, 2013

What Type Of Plugins Do I use to Compress Drums For EDM?

While I think compression is mostly pointless on some sounds, there really are some great plugins that are worth using on percussion and on the overall master bus. I have all these plugins activated simultaneously to save time. You don't have  to produce in stages!



Insert FX: Tape Simulators, Tape Saturators, Compressors, EQs etc.

Saturators, compressors and other simulators are great on the main drum channel. The Crystal Method has been known to use "Fatso Jr" to get their beefy drum sound. It is a tape simulator with many options. It works on any type of drum or percussive sound. There are also tube amp simulations and others that slightly disort or compress the sound into warmth and fatness. A regular compressor won't cut it. We need some sort of saturation and an intelligent use of these plugins can get you some really beefed up drums. The people designing these hope you to keep feeding it more signal and that it never sounds bad. While these insert FX can be really energizing, for some genres and songs it might be a pass.

Tip: Before you insert a compressor or saturator make sure you place the reverb plugin. Pre-reverb makes a compressor "breathe."

Mastering Compressors & FX:

Dynamics compressor will work on the master bus and balance sounds together. Make sure its a good plugin specifically designed for this use. Generic plugins don't always work so well. Generic multi-band compressors, ones that come with the program or system can leave me completely lost. I try out presets and then start tweaking. Also going back to your individual channels and re-tweaking everything is a good idea. Just make sure you save the best setups to A/B them or you will get lost.

With a couple plugins and little bit of Mastering dynamics you can get a louder sounding recording that doesn't sound "overcompressed." Don't be afraid to use multipe plugins on the same channel or multiple plugins for mastering. There isn't an end-all, be-all plugin! But some of them are like magic for their specific use!

Thats all I have to say right now on compressors. Mostly you just find a good product and tweak the knobs till it sounds just right. If you have a "magic bullet" processor its a lot harder to end up with a bad recording.

 

Check out Sonnox Oxford, UAD Plugins, EZ Mix, Elysian, and McDsp to get yourself started.

Sunday, March 10, 2013

Analog Synthesizers Don't Need Dynamic Compression.



Analog synthesizers don't need standard compression. You are lucky if your sound has any dynamics to compress in the first place. Dynamics usually have to be programmed into the sound. Dynamics are the result of amp envelopes, resonance modulation, and effects. Without these you don't have much range and material to compress. In a lot of tutorials, that were first geared toward mixing acoustic sounds, this knowledge might have been lost. Compression on synth sounds in EDM can be a waste of time.

Natural percussive sounds can have huge transients. This is a case where compression helps a lot. It can help on drum machines sometimes. But if you notice, when you put a synth in the mix, its super loud already and cuts through everything. It doesn't need to be louder. You could just bump up the mixer knob instead. Don't bother compressing and making it louder unless you really know what you are doing.

You should try compression on drums, so check out this article which helps explain mixing techniques for drums a bit better.

Sunday, February 24, 2013

5 Electronic Music Production Tips & Techniques



1. Start with amazing sounds.

You will need to start off with at least two amazing sounds that have some kind of relationship with the other. Contrasting, yet complimentary is often musical, like a pad and synth lead, or a bass and a lead. What matters is that these sounds are what you want to hear in your end product. The sounds must have something to say to the listener. Human's don't want to hear the same thing over and over again. If the sounds can talk to the listener and to other sounds, you'll be able to create a valid musical composition.

2. Integrate the drums.

A big mistake in dance music is not integrating the rhythm of the drums with the melody or bass.  Within the standard 4/4 time there can be endless variation. Drums are not just for keeping the time signature or creating a lead up. The groove of the drums indicates groove of the song but can do so much more. Rests provide space for other instruments to get in and creates anticipation for the human. The best dance music is drum heavy, but it is not all 4/4. There is usually a lot of extra magic going on, and it would be stupid to neglect how you program your drums in any genre.

3. Reduce annoying frequencies & conquer Loudness

So many recordings are broken by tonal imbalances. EQ can remove unwanted brightness. Remember that you want the listener to be able to turn up your music loud. Its good to test music at both loud and quiet levels.

Cutting with very narrow Q setting and boosting with a wide Q setting does the least amount of damage.

When it comes to loudness, check your dynamic range. Low dynamic range is similar to distortion and fatigues the ear. Some genres can get away with it by clever mixing. You do not need to use compression on every sound. Compression is overused and poorly by the inexperienced. Today's samples are already compressed or normalized, so it might be a mistake to go loud.

4. Try a different Plugin

Sometimes plugins just don't work well for us. They can increase the time we spend messing around to get the sound right. The best plugins have the best presets. A plugin should save us time! The myth that you shouldn't slap on a preset and expect magic is false. If it works, it works. I've fixed lots of tracks by using a preset, and then maybe one or two minor tweaks. You don't have to follow every step in a tutorial.

5. Have a goal in mind when composing.

Its really easy to get carried away. If you have a target of how you want your songs to sound, its much easy to break up the recording into smaller goals. If you keep progressing you will start to feel creative bursts and keep going.

Music is an emotional journery, not a hobby. You don't need to keep buying corporate synth gear. You can do it all in the computer and with your creative mind!